Unprimed Brass Starline
 

 

 
 
Barbeque
Gas
Boats
& Motor
Ceramic
Basins
Door
 Handles
Kitchen
Sinks
Kitchen
 Taps
 Laundry
 Tub
Shower
Heads
Surround
 Sound
Unprimed Brass Starline Outdoor
 Fridges

Vanities
Bathroom

 
 
             
 

About Us

Contact    

 

    
 


 
                                                                                              
222 Remington Starline Brass

 

.222 Rem, Triple Deuce
1.687 - 1.693 O.A.L.

The .222 Remington was introduced in 1950 and quickly became the favorite caliber of many shooters and hunters. The "Triple Deuce" found a lot of success as a benchrest caliber due to its inherent accuracy and the small caliber/high velocity combination made it a great choice for all types of varmint hunting. While the .222 Remington has slipped in popularity to calibers such as the .223 Remington, it is still available from several rifle manufacturers and is just as capable of a cartridge as it ever was.








 

223 Remington Brass
 



.223 Rem, .223, 5.56, 5.56mm Nato, 5.56x45mm


The .223 Remington is one of the most widely used center fire cartridges today. Tracing its roots back to the .222 Remington, the .223 was designed to achieve certain ballistics for military use. The .223 Remington, when in its military form, is known as the 5.56x45mm NATO. The differences between the two being the pressures that they are loaded at and the chamber in the firearm itself.

The .223 has established itself as an excellent varmint and target caliber. It dominates all other rifle calibers in competitions such as 3-gun, and has a dedicated following in several other sports due to its low recoil and accuracy potential. Those two attributes coupled with good velocity allow it to excel as a varmint gun also.

When loaded at .223 Remington pressures, our brass is safe to use in any firearm chambered for .223 or 5.56x45mm. If loaded to 5.56 pressures, you need to use firearms labeled for use with 5.56mm. It can be unsafe to fire 5.56mm ammunition in firearms with a .223 Remington chamber.

.222 Remington (Small Rifle primer)

 

.223 Remington (Small Rifle primer)

PACK 100
$81.00
 
PACK 100
$81.00

224 Valkyrie Brass




 

1.588 - 1.592 O.A.L.

The .224 Valkyrie was introduced in late 2017 by Federal. Unlike many calibers in the past that have been a joint effort between an ammo company and a single firearm company, the Valkyrie is already being chambered by several AR-15 manufacturers such as LaRue, JP Enterprises, and CMMG as well as several barrel makers such as Satern and Lothar-Walther.

The .224 Valkyrie is touted for its long range capabilities. While not the fastest factory .22 caliber AR chambering, its short fat case allows it to fit longer, high BC bullets. This means that it can keep a 90 grain Sierra bullet supersonic to 1300 yards, with much less recoil than other calibers. AR type rifles can be converted by changing the barrel and using a 6.8 SPC bolt and magazines.



 

 

 

243 Win Brass|





 

 

.243 Winchester, 243, 6×52mm

Introduced in 1955 by Winchester, the .243 Winchester is one of the most popular and versatile cartridges available.  Derived from the .308 Winchester, the .243's low recoil and flat trajectory make it an excellent all around cartridge.  Due to a wide bullet selection being readily available, the .243 can be applied just as well on the shooting bench looking over prairie dog town as it can waiting for a whitetail from 15’ up a tree.  The 243’s accuracy potential is excellent making it a popular choice of competitive shooters.





 

 

224 Valkyrie (Small Rifle primer)

 

.243 Win (Large Rifle primer)

not available
 
PACK 50
$58.00

260 Remington Brass

**6.5-08, **6.5-08 A-Square, .7mm

Introduced in 1997, the .260 Remington is another wildcat turned commercial cartridge. Utilizing a 6.5mm (.264") diameter bullet, the .260 has a lot less recoil than its .308 parent case, but shoots much flatter. This has made it very popular in many shooting sports, and makes it an excellent choice for hunting in much of the U.S.

** As with all commercialized wildcat cartridges, minor variations in Pre-SAAMI chambers may not headspace properly or may have clearance issues with SAAMI spec brass

 

 

277 Wolverine Brass

The .277 Wolverine is a 5.56 NATO based wildcat that was designed to give near 6.8 SPC performance out of an AR-15 type rifle, without requiring a specialized bolt or magazines. Since the Wolverine only requires a barrel change, it is one of the most affordable AR conversions. This is touted as an all-purpose cartridge that not only gives excellent down range performance for its size, but it is also well suited to pistol or SBR, and subsonic/suppressed applications.

 

.260 Remington (Large Rifle primer)
 

 


327 Fed Mag (Sml Pistol or Magnum
Sml Pistrol Primer

 

PACK 50   
$81.00
  NOT AVAILABLE 

 

 

30-30 Winchester Brass

 

.30 WCF
2.027 - 2.033 O.A.L.

 

Introduced in early 1895 for the Winchester Model 1894 lever-action rifle, the .30-30 was the USA's first small-bore, sporting rifle cartridge designed for smokeless powder. Jacketed bullets for the .30-30 are .308 inches in nominal diameter. Cast lead bullets for the .30-30 are also popular and usually are .309 inches in diameter.


 

The .30-30 is considered to be the "entry-class" for modern big-game hunting cartridges. While it is very effective on deer-sized and black bear-sized g303 british303 briame, most commercial loadings are limited in effective range to about 200 yd for that purpose, except when using ballistic-tip ammunition. The cartridge is typically loaded with bullets weighing between 150 and 170 grains but lighter loads are possible. Bullets of up to 180 gr can be used, but the overall length restrictions of the lever-action rifles most commonly chambered for this round limit their usefulness.

 

 


 

32 S&W Long Brass

 

 

0.911 - 0.916 O.A.L.

Designed for use in small framed revolvers, this cartridge is basically a shortened version of the .32 H&R Magnum. This cartridge is safe to fire in .32 H&R revolvers. **May not work with some wadcutter loads due to length of internal taper of case.








 

 

 

.30-30  Winchester (Large Rifle primer)

 

32 S & W Long Brass (Small Pistol primer)

 PACK 50

$50.00

 

PACK 100

$43.00

32-20 Brass

32-20 Win, 32-20 Winchester, 32-20 WCF, 32-20 Marlin
1.280 - 1.286 O.A.L.

Designed for use in rifles and single action revolvers, this cartridge is making a strong comeback with the advent of cowboy action shooting. This cartridge can also be formed by experienced cartridge converters into .25-20* and .218 Bee*. And with special forming dies available from RCBS and Lee, you can form a shortened version of the 7.62 Nagant cartridge.

 

 

 

327  Federal Mag

 

327 Federal, 327 Mag, 327 Federal Magnum
1.191 - 1.196 O.A.L.

327 Federal brass is a beefed up lengthened verison of the 32 H&R Mag.  It was designed as a personal defense cartridge.  It has light recoil making it easy to handle due to firing light weight bullets at high velocities.  The 327 also has potential as a small game cartridge.

 

 

32-20 Brass (Small Pistol Primer)
 

 327 Federal Mag (Sml Pistol or Magnum Sml Pistrol Primer
PACK 100
$55.00
 
NOT AVAILABLE

357 Mag Brass

357 Magnum Brass, 357 Mag Brass, 357 Brass, 357 Smith & Wesson Mag Brass, 357 S&W Mag Brass, .357 Mag Brass
1.275 - 1.285 O.A.L.

357 Mag Brass: Basically a lengthened version of the .38 special, the 357 Magnum is one of the most popular handgun calibers in the world. Almost every revolver manufacturer makes a firearm in this chambering. Also used in many lever action carbines. 357 Magnum Brass.

 

 

357 Mag Brass

Brass
1.275 - 1.285 O.A.L.

357 Mag Brass: Basically a lengthened version of the .38 special, the 357 Magnum is one of the most popular handgun calibers in the world. Almost every revolver manufacturer makes a firearm in this chambering. Also used in many lever action carbines. 357 Magnum Brass.

 

357 Mag Brass (Magnum Sml Pistol primer)
 

 

357 Maximum (Small Rifle Primer)
 

PACK 100

sold out

 
PACK 100

$109.00


 

300 Blackout Brass


 

.300 AAC Blackout, .300 BLK, 7.62x35mm


The .300 Blackout is based off of a shortened 5.56x45mm case that is necked to .30 caliber. For AR-15 platform rifles and pistols it only requires changing the barrel to go from 5.56 to .300 Blackout. The Blackout's main purpose is to be used at subsonic velocities in suppressed firearms. Many bolt action and single shot rifles are now being produced in this caliber as well.

 

 

 

 


 

 

308 Match Brass



.308 Winchester "Palma", .308 Winchester Small Rifle 


The .308 Match is our small primer version of the .308 Winchester case. Many competitive shooters prefer the consistent velocities produced by small rifle primers. Like all of our other small primer rifle cases, we utilize our standard .080" flash hole diameter, as we feel it gives better ignition with slower burning and harder to ignite powders, making it more user friendly than many of the small primer/small flash hole versions of this caliber*.

For the Large Rifle Primer version, please see our 
.308 Win.

*As with all types of cases this large with small primer pockets, it will require care in powder and primer selection in cooler temperatures to prevent hang fires. Single-based propellants are generally easier to ignite and a quality primer such as the Remington 7 1/2 BR are recommended.

 

.300 Blackout (Small Rifle primer)

 

.308 win (Small Rifle primer)

PACK 100

$60.00

 

PACK 50

$63.00

308 Win Brass

.308 Winchester, .308, 7.62mm Nato, 7.62x51mm

The venerable .308 Winchester has made quite a name for itself since it was first introduced in 1952. The .308 and its military equivalent, the 7.62 x 51mm Nato, is a very efficient cartridge that has excellent ballistics, while still being fairly easy on the shoulder. That, and its inherent accuracy have kept it thriving as both a competition and hunting caliber.

For the Small Rifle Primer version of our .308 Win, please see our 
.308 Match
 

 

 

 

 

 

338 Federal Brass

(.338-08**)

One of the newest members of the .308 Winchester family, the .338 Federal was introduced in 2006 by Federal and Sako. It is capable of achieving the same muzzle energy as some magnum calibers with less recoil.  It also fits in standard length short action rifles and AR-10's without sacrificing magazine capacity.  It hits harder than the .308, and shoots flatter than the .358 Winchester, making it an excellent choice for a close to mid-range hunting caliber.  One thing to consider when selecting hunting bullets for the .338 Federal is that most bullets available in .338 caliber were designed
for higher velocity cartridges.  Generally bullets under 200 grains or ones specifically designed for it are your best option for hunting.  Check with your bullet manufacturer of choice for their recommendation.
**Not all .338-08 wildcats were chambered the same and may not headspace correctly with factory .338 Federal brass or ammunition
.

 

 
 

 

.308 Win (Large Rifle primer)

 

.338 Federal (Large Rifle primer)

PACK  50
$63.00
 

PACK  50

$130.00

 

.348 Win
2.242 - 2.248 O.A.L.

The .348 Winchester was developed for the Winchester Model 71 lever action rifle in 1936. Touted as being one of the most powerful lever action cartridges available, it was popular for hunting large game all across America. The .348 Winchester also serves as the base for several wildcat cartridges.
 

 

 

358 Winchester Brass

8.8x51mm

Based on the .308 Winchester, the .358 Winchester was introduced by Winchester in 1955 for use in lever and bolt-action rifles.  While it had not seen the widespread popularity as the other .308 -based cartridges, its brush busting capability still makes it an excellent choice for hunting any of North America's big game.  With the recent rise in popularity of AR-10 style rifles, the .358 Winchester is starting to be chambered in it because the .358 gives the AR-10 just a little more thump than the .308 Winchester.

 

.348 Winchester (Large Rifle primer)

 

.358 Winchester (Large Rifle primer)

PACK  50

$240
 
 

PACK  50

$80.00

 



444 Marlin Brass

The 444 Marlin was introduced in the mid- 60's to give their model 336 Lever gun a boost in horsepower.  Over the years the .444 has been offered in a number of rifles and even a few pistols. It is another caliber that is seeing new life due to the changing game laws in many states allowing straight wall cartridges for deer hunting where they were previously limited to slug guns and muzzleloaders.

 

 

 

450 Bushmaster Brass

The 450 Bushmaster was designed as a close range, big bore hunting caliber for the AR-15 platform.  As with most AR cartridge conversions, it only requires swapping out the upper receiver. With the introduction of some new bolt action rifles in this caliber and many states changing game laws allowing straight wall cartridges for deer hunting, the  .450 Bushmaster is enjoying a surge in popularity. 

 

.444 Marlin (Large Rifle primer)

 

.450 Bushmaster (Small Rifle primer)

PACK  50

$80.00

 

PACK  50

$84.00


10MM Auto Brass

10mm, 10Auto, 10mm Automatic

10mm Auto Brass - The 10mm Auto was designed primarily for law enforcement but was quickly abandoned in favor of the .40 S&W. Now making a comeback, this .40" caliber handgun is more powerful than the .45 Auto with higher magazine capacity.

 

 

10MM Mag Brass

10mm Magnum, 10mm Magnum Brass, 10 Mag Brass, 10mm Mag Brass

The 10MM Magnum Brass is a heavy duty, lengthened 10MM Auto. 
CANNOT BE USED IN STANDARD 10MM PISTOL.

 

10MM Auto Brass (Large Pistol primer)
 
10MM Mag Brass (Large Pistol primer)

PACK  100

$50.00

 NOT AVAILABLE
 

 


.30 M1 C
arbine

Designed for use by the US military as a light carbine in the 1940's, the .30 carbine was used in the venerable M1 Carbine and the full auto M2 version.  The gun of choice for many soldiers in WW11 the M1 is still very popular today.  Ruger also offers the .30 Carbine in their popular Blackhawk revolver and new M1's are available from Auto-Ordnance.

 

 

7.65x21, 7.65 Luger

This German designed, bottleneck cartridge is shorter and less powerful than the .260 rem. Pistols produced in this caliber include the Beretta M951, Ruger P89, and Walther P-38.









 

30 Carbine (Small Rifle primer)
 

30 Luger Brass (Small Pistol primer)

PACK  100

$60.00

 

Pack 100

$60.00


30 Mauser Brass

7.63x25mm, 7.63 Mauser

This rimless, bottleneck cartridge was developed by American gun designer Hugo Borchardt and was used in the Mauser pistol. We recommend using .308" diameter bullets in our brass.




 

 

32 S&W (SHORT) Brass

The .32 S&W, not to be confused with the .32 S&W Long, was originally designed as a black powder cartridge for use in small, inexpensive pocket revolvers.
Our brass has been designed to be safe with both smokeless and black powder, and can be safely fired in revolvers chambered for 32 S&W Long, 32 H&R Magnum and 327 Federal Magnum
 

 

30 Mauser Brass (SmallPistol primer)

 

32 S&W (Short) (Small Pistol primer)

PACK 100

$60.00

 NOT AVAILABLE
 


32 Auto

.32 ACP, 7.65 Browning, .32 Automatic, .32 Automatic Colt Pistol

The .32 Auto is a semi-rimmed pistol cartridge that was originally designed for use in small pocket pistols and a few revolvers.

The .32 Auto is an inherently accurate cartridge, though the pistols it has historically been chambered in were not.  It is now gaining popularity as a target cartridge due to being chambered in bulls eye pistols such as the Pardini.

 

 

 

32 H&R Mag Brass

32 H&R Brass, 32 Magnum Brass, 32 Harrington & Richardson Brass, 32 Harrington & Richardson Magnum Brass

Basically a lengthened .32 S&W Long, the .32 H&R is one of the most powerful .32 caliber handgun cartridges available today.

 

 32 Auto (Small Pistol primer)

 
32 H&R Mag Brass (Small Pistol primer)
NOT AVAILABLE
 
 

PACK 100

$40.00

32 S&W Long Brass

Designed for use in small framed revolvers, this cartridge is basically a shortened version of the .32 H&R Magnum. This cartridge is safe to fire in .32 H&R revolvers. **May not work with some wad cutter loads due to length of internal taper of case. 

 

 


32-20 Brass

32-20 Win, 32-20 Winchester, 32-20 WCF, 32-20 Marlin

Designed for use in rifles and single action revolvers, this cartridge is making a strong comeback with the advent of cowboy action shooting. This cartridge can also be formed by experienced cartridge converters into .25-20* and .218 Bee*. And with special forming dies available from RCBS and Lee, you can form a shortened version of the 7.62 Nagant cartridge.

*The SAAMI spec for .25-20 & .218 Bee is smaller at the base than the .32-20 which can cause clearance issues on some rifles. 

 

 

32 S&W Long Brass (Small Pistol primer)

 

32-20 Brass (Small Pistol primer)

PACK  100

$43.00

 

PACK  100

$55.00

327  Federal Mag

327 Federal, 327 Mag, 327 Federal Magnum

327 Federal brass is a beefed up lengthened version of the 32 H&R Mag.  It was designed as a personal defense cartridge.  It has light recoil making it easy to handle due to firing light weight bullets at high velocities.  The 327 also has potential as a small game cartridge.

 

 

357 Maximum Brass

357 Remington Maximum, .357 Remmax, .357Max, .357 Supermag

The .357 Maximum was developed in the early 80's by Ruger and Remington Arms as a silhouette cartridge for the Blackhawk revolver.  This beefed up, elongated .357 Magnum has also been chambered in Dan Wesson revolvers as well as several single shot rifles and pistols including the T/C Contender.  Game laws in several states have changed, and are now allowing pistol caliber rifles for deer hunting, giving new life to this once obsolete cartridge. 

327 Federal Mag (Sml Pistol or Magnum Sml Pistol primer)

 

357 MAXIMUM (Small Rifle primer)
 

NOT AVAILABLE
 
 

PACK  100

$109.00

357 Mag Brass

 

357 Magnum Brass, 357 Mag Brass, 357 Brass, 357 Smith & Wesson Mag Brass, 357 S&W Mag Brass, .357 Mag Brass
1.275 - 1.285 O.A.L.

357 Mag Brass: Basically a lengthened version of the .38 special, the 357 Magnum is one of the most popular handgun calibers in the world. Almost every revolver manufacturer makes a firearm in this chambering. Also used in many lever action carbines. 357 Magnum Brass.

 

 

357 SIG Brass

357 Sig-Sauer

Basically a .40 S&W necked down to accept a .355" diameter bullet. Most pistols chambered for the .40 S&W can be converted to .357 Sig or complete firearms are available from Sig-Sauer. Cannot be formed out of .40 S&W.

 

357 Mag Brass (Magnum Small Pistol primer)

 


357 SIG Brass (Small Pistol primer)

PACK  50
 

sold out

 

PACK  100

$57.00

360 DW Brass

360 Dan Wesson

The .360 DW is a lengthened .357 Magnum with a modified web. Guns and case designed by Dan Wesson Arms.




 

 

 )

375 Win Brass

375 Winchester

The .375 Winchester was brought to the market as a heavy hitting option for Winchester's "Big Bore '94" rifle. This cartridge is a beefed up and shortened version of the .38-55 Winchester and is capable of clean kills on all of North America's big game within its range limitations.

 

360 DW Brass (Magnum Small Pistol primer)

 
375 Win (Large Rifle primer)
NOT AVAILABLE
 
 

PACK 50

$90.00



38 Long Colt Brass

38 Long Colt

Basically a shortened version of the .38 Special. Can be fired from most firearms chambered for .38 Special and .357 Magnum.

 

 

38 S&W Brass

38 Smith&Wesson, 38 Colt New Police

Also known as the .38 Colt New Police and the .38 Super Police. CANNOT BE USED IN 38 SPECIAL.

 

 38 Long Colt Brass (Small Pistol primer)

 


38 S&W Brass (Small Pistol primer)

PACK  100

$43.00

 

PACK  100

$52.00

38 Short Colt Brass

Basically a shortened  38 Special. NOT a substitute for 38 S&W. Can be fired in most guns chambered for .38 Special or .357 Magnum.

 

 




38 Special Brass

38 Special Brass, 38 Smith&Wesson Special, 38 SPL, 

38 Special Brass: Known for its accuracy, the .38 Special is one of the most popular handgun cartridges in the world. Can be fired in all revolvers chambered for the .357 Magnum.

 

38 Short Colt Brass (Small Pistol primer)

 


38 Special Brass (Small Pistol primer)

PACK  100

$43.00

 

PACK  100

$38.00

38 Special+P Brass

38+P

38 SPL+P has  no difference from the standard 38 SPL, other than head stamp designation for load segregation. This is due to the fact that our standard case design will handle +P pressures with no
problems.

 

 

 

38 Super +P Brass

The .38 Super+P is a .38 Super case made of heavy duty material with standard semi-rimmed head design and similar internal dimensions.

 

38 Special+P Brass (Small Pistol primer)

 


38 Super +P Brass (Small Pistol or Small Rifle primer)

NOT AVAILABLE  NOT AVAILABLE

38 Super Brass

38 Super Auto, 38 Super Automatic

An improved version of the .38 Auto, this semi-rimmed cartridge is very popular in the competition world. Not to be used with .38 Super data in firearms originally chambered for the .38 Auto cartridge.

 

 



38 Super Comp Brass

38 Super Rimless, 38 Comp

38 Super Comp Brass: The .38 Super Comp is a heavy duty rimless 38 Super. Similar internal capacity to 38 Super. Designed to enhance feeding reliability in high capacity magazines of competition race guns chambered for .38 Super. May require minor extractor tuning in some firearms. When using Dillon press .223 shell plate works best where applicable.

 

38 Super Brass (Small Pistol or Small Rifle primer)

 

 

38 Super Comp Brass (Small Pistol or Small Rifle primer)

 

PACK 100

$42.00

 

PACK  100

$43.00

38 TJ Brass

38 Todd Jarrett

Very similar to the .38 Super Comp but with modified extractor groove geometry to aide in full length resizing. Used mainly in competition race guns.

 

 

 

 

38-40 Brass

38-40 Win, 38-40 Winchester, 38-40 WCF, 38-40 Marlin, .38 WCF

Originally a black powder cartridge, this is basically a .44-40 necked down to accept a .401" diameter bullet. Our .38-40 brass has a wall thickness of .0062" but is still stiffer and less fragile than other brands which make it much easier to reload.

 

38 TJ Brass (Small Pistol or Small Rifle primer)

 

 

38-40 Brass (Large Pistol primer)

NOT AVAILABLE
 
 

PACK  100

$67.00

 38-55 Brass (2.080

38-55 Win, 38-55 Winchester, 38-55 Ballard

The .38-55 is the standard length of 2.080" which is the same as Winchester case. Case mouth has thinner walls (.0072" average thickness at mouth) than the Winchester case allowing for use of the wide variety of bullet diameters, especially in tight chamber/large bore situations.

 

 

 

38-55 Long Brass (2.125)

38-55 Win, 38-55 Winchester, 38-55 (2.125), 38-55 Ballard
2.122 - 2.130 O.A.L.

This is a .38-55 case with the original overall length of 2.125" for use in .38-55's that are suited for longer cases (most firearms will accept this length). Wall thickness at the mouth averages .0072" which allows for use of a wider variety of bullet diameters, especially in tight chamber/large bore situations. Headstamp reads *-2.125-*-38-55
 

 

38-55 Brass (2.080") (Large Rifle primer)

 

38-55 Long Brass (2.125) (Large Rifle primer)

PACK 50

$55.00

 

PACK 50

$50.00

380 Auto Brass

380 Automatic, 380 ACP, 9mm Kurz, 9x17mm
0.672 - 0.678 O.A.L.

380 Auto Brass: The 380 Auto A.K.A. the 9mm Kurz/9x17mm/.380 ACP, this cartridge was designed for use in small framed automatic pistols. 9mm Kurz Brass / 9x17mm Brass / .380 ACP Brass.

243

 

 

40 S&W Brass

 

40 S&W Brass, 40 Smith & Wesson Brass, 40 Smith Brass, 40 Cal Brass, 40 Caliber Brass, 40S&W Brass
0.842 - 0.847 O.A.L.

The .40 S&W is basically a short version of the 10mm Auto that utilizes the Small Pistol primer.  This cartridge quickly became a favorite among Law Enforcement, target shooters, and plinkers due to its combination of accuracy, power, low recoil and availability.

 

380 Auto Brass (Small Pistol primer)

 

40 S&W Brass (Small Pistol primer)

NOT AVAILABLE

 

PACK 100

  $50.00

40 Super Brass

0.989 - 0.992 O.A.L.

The .40 Super is a heavy duty lengthened case similar to the .45 Auto cartridge but necked down to .40" caliber. Developed by Triton Cartridge. Conversion Systems can be found at Barsto Barrels or Clark Custom Guns.

 

 

 

40-65 Brass

40-65 Win, 40-65 Winchester, .40-60 Marlin, .40-65 Marlin
2.097 - 2.104 O.A.L.

This obsolete vintage cartridge was originally designed for use with both smokeless and black powder. Our case is properly sized to fit in even the tightest chambers*. Internal capacity is similar to that of Winchester brass. Wall thickness at mouth is .0095" average.

*Note: In firearms with larger chambers, this brass may become shorter than desired after fireforming. Those shooters who wish to have brass that is longer than 2.090" after fire forming and neck sizing should form our .45-70 brass into .40-65 as a good alternative.

 

40 Super Brass (Small Pistol primer)
 

  40-65 Brass (Large Rifle primer)
 
NOT AVAILABLE
 
 

PACK 50

$80.00

400 Cor-Bon Brass

0.894 - 0.899 O.A.L.

400 Cor-Bon (Corbon) case is a 45 Auto+P based case necked down to 40 caliber. The primer pocket was changed from large pistol primer to small pistol/rifle primer in 12/00. Test results concluded no adverse affect from switching to small primer pocket. Cor-Bon is now recommending Win. small pistol works best and if using small rifle Remington 7 1/2 works the best. Most popular auto pistols chambered for the .45 Auto can be converted to the .400 Cor-Bon cartridge

 

 

41 Colt Brass

41 Long Colt DA Brass, 41 Long Colt Brass, 41 Long Colt Double Action Brass, 410 Extra Long Colt Brass, .41 LDA brass
1.121 - 1.127 O.A.L.

41 Long Colt DA case, also known as the .410 Extra Long Colt, .41 L.D.A., .41 Long Colt, and .41 Colt Double Action. Suitable for use in most .41 Colt revolvers including the Colt Thunderer, New Army, New Navy, Army Special, Single Action Army, and the Bisley. Use #32 RCBS shellholder. Heel-type bullets and Hollow Base bullets that expand into the rifling are generally the best choice for projectiles.

 

400 Cor-Bon Brass (Small Rifle or
Small Pistol primer)

 

 

41 Colt Brass (Small Pistol primer)

NOT AVAILABLE  NOT AVAILABLE

 

41 Mag Brass

41 Magnum Brass, 41 Remington Mag Brass, 41 Rem Mag Brass
1.275 - 1.285 O.A.L.

Designed to fill the gap between the .357 Magnum and .44 Magnum, the .41 Magnum is a happy medium between power and recoil.

 

 
41 Special Brass
.41 Spl1.145 - 1.155 O.A.L.

The .41 Special is a shortened version of the .41 Magnum. This cartridge was originated by the late Elmer Keith by simply trimming the .41 Magnum down to the same length as .44 Special and .38 Special. Custom pistolsmiths such as Hamilton Bowen have built custom revolvers for this caliber out of mid-size .357 Magnum revolvers to create big power in a smaller frame. This case can also be used in any firearm designed for the .41 Magnum and would work excellent for light plinking loads. Load data can be found via a quick internet search, but be sure it is coming from a reputable source.

 

41 Mag Brass (Large Pistol primer)

 

41 Special (Large Pistol primer)

NOT AVAILABLE  NOT AVAILABLE

414 Super Mag Brass

414 E.T. Gates Brass, 414 Super Magnum Brass
1.600 - 1.610 O.A.L.

Designed for silhouette shooting, this cartridge is basically a heavy-duty, lengthened version of the .41 Magnum. Firearms for this caliber have been produced by Dan Wesson and Thompson/Center.

 

 

 


44 Auto Mag Brass

44 AMP Brass, 44 Auto Magnum Brass
1.293 - 1.298 O.A.L.

Designed to achieve .44 Magnum ballistics from a semi-automatic pistol, this caliber became famous by Clint Eastwood in Sudden Impact. Gun system was designed by the late Harry Sanford and was produced under several names such as A.M.T., Automag Inc., and High Standard.

 

  • 414 Super Mag Brass (Large Pistol primer)

 

44 Auto Mag Brass (Large Pistol primer)

NOT AVAILABLE  NOT AVAILABLE

 

44 Colt Brass

44 Colt R&D, 44 Colt Conversion
1.095 - 1.105 O.A.L.

Essentially a 44 SPL. but .050" shorter with a smaller diameter rim (Same as 41 Mag). Originally used in Colt 1860 cartridge conversion revolvers. Use RCBS #30 (may require slight modification to clear extractor groove) or #21 shell holder, or Lee #3.

 

 

 

44 Mag Brass

44 Magnum Brass, 44 Remington Magnum Brass, 44 Rem Mag Brass
1.270 - 1.280 O.A.L.

44 MAG Brass: The most powerful commercial handgun cartridge for several years, the .44 Magnum is still one of the most popular handgun cartridges in the world. Almost every major handgun manufacturer produces a firearm in this caliber. It is also available in carbine form from many rifle manufacturers. 44 Magnum Brass.

 

44 Colt Brass (Large Pistol primer)

 

44 Mag Brass (Large  Pistol Primer)

OT AVAILABLE
 

 

PACK 100

$50.00

       



44 Russian Brass

44 S&W Russian, 44 Smith&Wesson Russian
0.956 - 0.966 O.A.L.

44 Russian, or .44 Smith and Wesson Russian, is basically a shortened 44 Special. It can be fired from guns chambered in .44 Special or .44 Magnum.

 

 

44 Special Brass

44 Spl, 44 S&W, 44 S&W Special, 44 Smith&Wesson
1.145 - 1.155 O.A.L.

A forerunner to the .44 Magnum, the .44 Special is a very versatile revolver cartridge suited for uses spanning target shooting, self defense, and hunting.

 

4 Russian Brass (Large Pistol primer)

 

44 Special Brass (Large Pistol primer)

NOT AVAILABLE

 

NOT AVAILABLE


 


44-40 Brass

44-40 Winchester Brass, 44-40 Win Brass, 44 Win Brass, 44-40WCF Brass, 44 Winchester Brass, 44-40 Marlin Brass
1.294 - 1.300 O.A.L.

Also known as the .44-40 Winchester, .44 WCF, and .44 Winchester, this caliber gained popularity because of its availability in both rifles and handguns. The advent of Cowboy Action Shooting has helped to revive this obsolete vintage cartridge. Our .44-40 brass has a wall thickness of .0065" but is still stiffer and less fragile than other brands, which makes it much easier to reload.

*It has come to our attention that some Uberti revolvers have issues with light hammer strikes and will only fire with Federal primers, which we generally recommend for revolvers anyway.

 

 


445 Super Mag Brass

445 Super Magnum Brass, E.T. Gates 445 Super Mag Brass
1.600 - 1.610 O.A.L.

Designed by Elgin T. Gates for silhouette shooting, the .445 Super Magnum is a heavy duty, lengthened version of the .44 Magnum. Guns have been manufactured by Dan Wesson and Thompson/Center. Primer pocket must be reamed deeper if you wish to use Large Rifle primers.

 

44-40 Brass  (Large Pistol primer)

 

445 Super Mag Brass (Large Pistol primer)

PACK 100

$56.00

 

NOT AVAILABLE


45 Auto +P Brass

45 ACP+P, 45 Automatic+P
0.892 - 0.897 O.A.L.

The 45 Auto+P is a strengthened version of the 45 Auto with the same external dimensions. A thicker web and heavier sidewall at base strengthens the case in potentially unsupported areas. This case has approximately 2 grains less internal water capacity than the standard 45 Auto.

 

 


45 Auto Brass

45 ACP, 45 Automatic, 45 Automatic Colt Pistol
0.892 - 0.897 O.A.L.

.45 Auto Brass: Designed by John Browning, the .45 Auto, or .45 ACP, has been adopted at one point or another by several governments as their official military handgun chambering. It is still popular in the U.S. as a personal defense or target gun.

 

45 Auto +P Brass (Large Pistol primer)

 


45 Auto Brass (Large Pistol primer)

NOT AVAILABLE

 

PACK 100

$47.00


45 Auto Rim Brass

45 AR, 45 Automatic Rimmed
0.889 - 0.894 O.A.L.

The .45 Auto Rim has an extra thick rim that allows it to be used without a moon clip in revolvers designed for .45 Auto/moon clip combination. It is built with the same integrity as our 45 Colt case. THIS CASE WILL NOT WORK IN SINGLE ACTION REVOLVERS CHAMBERED FOR .45 AUTO (such as the Ruger Blackhawk with .45 Auto cylinder).

 

 


45 Colt Brass

45 Long Colt, 45 LC
1.270 - 1.280 O.A.L.

45 Colt Brass. Originally designed for use with blackpowder, the .45 Colt is one of the most powerful, commonly available handgun cartridges when loaded with smokeless powder. Our .45 Colt brass has been tested to .44 Magnum pressures in gun systems suitable for such loads. *New brass may require neck sizing for use with .452" and smaller bullets.

 

45 Auto Rim Brass (Large Pistol primer)

 

45 Colt Brass (Large Pistol primer)

NOT AVAILABLE

 

PACK 100

$53.00


45 Cowboy Special Brass

Cowboy 45 Special, 45 SPL, C45S
0.892 - 0.896 O.A.L.

The Cowboy .45 Special is a case that is optimized for use with light loads in .45 Colt caliber revolvers for Cowboy Action Shooting. Light loads with excessive airspace are a recipe for case splits and erratic function. By using the Cowboy .45 Special case, with its .45 Colt rim and .45 Auto length, the problem no longer exists. While many claim that .45 Auto load data can be used in this caliber, it is important to realize the limitations of the firearm it is chambered in and only use loads that fall within the pressure range of that firearm. Generally these can be loaded using .45 Colt dies and a modified (shortened) crimp die, or .45 Auto Rim roll crimp die.

 

 

45 G.A.P. Brass

45 Glock, 45 Glock Auto Pistol
0.752 - 0.758 O.A.L.

This .45 Auto based case is designed for the 45 Glock Auto Pistol just recently released. Should not be used in firearms chambered for .45 Auto.

 

45 Cowboy Special (Large Pistol primer) 45 G.A.P. Brass (Small Pistol primer)
 

mimma

 
NOT AVAILABLE
       


45 Raptor Brass

1.790 - 1.796 O.A.L.

The 45 Raptor is a rimless .460 S&W mag that was designed for use in the AR-10 platform. It can now be found in some bolt-action rifles, such as the Savage Model 10. To convert for bolt-action rifles it requires only a barrel change and for AR-10 platform rifles it requires a barrel change and a modified magazine.  The 45 Raptor uses .460 S&W load data and 45 colt/454 casull or .460 S&W dies.
 

 

 



45 S&W Schofield Brass

45 Smith & Wesson, 45 Schofield, 45 S&W
1.090 - 1.100 O.A.L.

45 Schofield is similar to the 45 Colt. Differences include head diameter approximately .010" larger, case length is 1.090" to 1.100" compared to 1.273" to 1.283" in the .45 Colt. Substantially less internal capacity for shooting light loads in most 45 Colt guns with no modifications. You may need to tune extractor on some lever action rifles, or decrease diameter of the ratchet on the cylinder by .010 to accommodate the larger head diameter in Ruger Vaquero and Colts. Also increases magazine capacity in rifles.
 

 

45 RAPTOR (Large Rifle primer) 45 S&W Schofield Brass (Large Pistol primer)
NOT AVAILABLE  PACK 100

$68$68.00

       


45 Super Brass

0.892 - 0.897 O.A.L.

45 Super* is the same externally as the 45 Auto, but has a thicker web, denser grain structure in the metal, and special heat treat process that enhances the durability of the case. Similar internal capacity as the 45 Auto. Some 45 Super load data was published by Triton Cartridge before they went out of business. *Loads to be shot ONLY in guns modified professionally to handle extreme pressures of this cartridge. DO NOT SHOOT IN STANDARD 45 AUTO!

 

 
45 Super Brass (Large Pistol primer)
 
 

NOT AVAILABLE
 

 

  
       


45 Win Mag Brass


45 Winchester Magnum Brass, 45 Win Magnum Brass, 45 Winchester Mag Brass
1.191 - 1.196 O.A.L.

Basically a heavy duty, lengthened version of the .45 Auto. Firearms have been available from Wildey, Magnum Research, L.A.R., and Thompson/Center. 45 Winchester Magnum.

 

 

                                                                                                  
                                                 45-100 Brass (.45-2.6)                                                
 

45-100 Sharps
2.596 - 2.603 O.A.L.

This is a .45-70 based case that is 2.6 inches long and is suitable for smokeless or black powder loads. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application. See annealing procedure in Commonly Asked Questions, section #4.
 

 

45 Win Mag Brass (Magnum Large
Pistol primer)
 

45-100 Brass (.45-2.6) (Large Rifle primer)

PACK 100

TBA

 

NOT AVAILABLE

       

 

45-70 Government Brass, 45-70 Marlin Brass, 45-70 Govt Brass

Our .45-70 brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application.

 

 

45-82 Win, 45-85 Win,45-90 Win, 45-90 Winchester

This is a .45-70 based case that is 2.4 inches long and is suitable for smokeless or black powder loads. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application.

 

45-70 Gov't Brass (Large Rifle Primer)

 

45-90 Brass (.45-2.4) (Large Rifle primer)

PACK 50

$52.00

 

PACK

$115.00

       

Originating in 1957, the .454 Casull is one of the most powerful revolver cartridges available today. This is basically a magnum version of the .45 Colt. It has been lengthened by .100" so it can't be fired in a .45 Colt firearm, though .45 Colt can be fired safely in a .454 Casull. Gun systems are available from Freedom Arms, Taurus, Ruger, Magnum Research, and Thompson/Center.

 

 

455 Webley MKII

The .455 Webley MKII is a British revolver cartridge designed for their military in the late 1800's. This brass will work for all of the Webley MKII, MKIII,MKIV, MKV, and MKVI cartridges. The original MKI case is longer, but this will work as a short substitute for it. It is important to note that the Webley cartridges designations don't necessarily coincide with that model revolver, and smokeless powder loads may not be safe in all revolvers.

  
*It is important to note that many Webley revolvers in the US have been modified to use the much thicker rimmed .45 Auto Rim cartridge by machining the cylinder to accept the thicker rims. Firearms modified as such will not work with standard .455 MKII brass.
 

 

454 Casull Brass (Small Rifle primer)

 

455 Webley MKII (Large Pistol primer)

NOT AVAILABLE

 

PACK 100

TBA

       

 

458 HAM'R Brass

The .458 HAM'R is a .458 SOCOM based caliber that was designed by Bill Wilson to push a 300 grain projectile 200fps faster than the SOCOM. Due to limitations of the bolt and extension of the AR-15, the .458 HAM'R is chambered in a hybrid AR platform that utilizes a larger diameter bolt and extension. This allows the .458 HAM'R to reach its full potential while still being a fairly lightweight carbine.

 

 

 

458 SOCOM Brass

The SOCOM is an awesome cartridge that is basically a long 50AE (O.A.L. of 1.575") with a rebated .308 style head configuration, necked down to utilize a .458" diameter projectiles. It has been chambered in some bolt guns but its claim to fame is in the AR-15 platform.  

 

458 HAM'R (Small Rifle primer)

 
458 SOCOM Brass (Large Pistol primer)

NOT AVAILABLE
 

 

PACK 50

$110.00
       

460 Rowland Brass

The .460 Rowland is a lengthened, heavy duty .45 Auto based case designed by Johnny Rowland. It delivers .44 Magnum ballistics in a semi-automatic handguns chambered for this cutting edge cartridge.   

 

 

460 Smith&Wesson, 460 Mag

The highest velocity revolver cartridge ever produced, this .45 caliber chambering is basically a lengthened .454 Casull.

 

460 Rowland Brass (Large Pistol primer)

 


 
460 S&W Mag Brass (Large Rifle primer)

NOT AVAILABLE

 

PACK 50

$70.00

       



475 Linebaugh Brass

The .475 and .500 Linebaugh are among the most powerful hunting revolver calibers available today. Several custom gun makers chamber special revolvers for this proprietary cartridge. Freedom Arms is also now chambering in .475. The .475 fires a .476" diameter cast projectile or a .475" diameter jacketed bullet.

 

 

475 Wildey Mag Brass

475 Wildey, Wildey Magnum

475 Wildey Mag - Starline has made this case exclusively for the manufacturer of the gun for many years. Now you can purchase direct from us. This gun gained notoriety in the Charles Bronson Death Wish Movies. Uses a .475 diameter bullet and contains a large pistol pocket.

 

475 Linebaugh Brass (Large Rifle primer)

 


475 Wildey Mag Brass (Large Pistol primer)

NOT AVAILABLE

 

NOT AVAILABLE

       


480 Ruger Brass

Based on the .45-70 case, this propriet
ary cartridge is made popular because of its big power but manageable recoil. Firearms are available from Ruger.

 

 

5 in 1 Blank Brass

45 Colt Blank Brass, 44-40 Blank Brass, 38-40 Blank Brass, 44 Mag Blank Brass, 44 SPL Blank Brass.

The 5 in 1 is a general blank case that is designed to feed in lever action rifles. It is the same length as a loaded cartridge in 45 Colt, 44-40, 38-40 and 44 MAG and will chamber in all (must neck for 38-40). Will also chamber in 44 SPL if trimmed. It accepts large rifle primers and contains .140 diameter

 

 480 Ruger Brass (Large Pistol primer)
 


5 in 1 Blank Brass (Large Rifle primer)

NOT AVAILABLE

 

NOT AVAILABLE

       


 

5.56x45mm Brass

 

5.56, 5.56mm NATO, 5.56x45
1.745 - 1.750 O.A.L.

The 5.56x45mm NATO is the military version of the .223 Remington, which is one of the most widely used centerfire cartridges today. Starline’s 5.56x45mm brass is identical to Starline’s .223 Remington brass except for a slight change in the metallurgy making it harder at the base of the case. 

When loaded at .223 Remington pressures, Starline's .223 brass is safe to use in any firearm chambered for .223 or 5.56x45mm. If loaded to 5.56 pressures, you need to use firearms labeled for use with 5.56mm. It can be unsafe to fire 5.56mm ammunition in firearms with a .223 Remington chamber.

 

 

50 AE Brass

50 Action Express

This rebated head design cartridge was developed for the Desert Eagle handgun.

 

5.56x45mm Brass (Small Rifle primer)

 

50 AE Brass (Large Pistol primer)

NOT AVAILABLE

 

NOT AVAILABLE

       

50 Alaskan Brass

50 AK

This cartridge is a lengthened version of the .500 Linebaugh. Case is 2.1 inches long. Designed for bear hunting. Guns are built by Hamilton Bower, Jim West, Reagan Nonneman and others.

 

 

50 Beowulf® Brass

50 BEO

The 50 BEOWULF® is a powerful big bore cartridge designed for use in AR style rifles. The brass case is essentially a lengthened 50 AE (1.650 long) with a rebated 7.62x39 style head. This brass case is designed to use a large magnum pistol primer.

 

50 Alaskan Brass (Large Rifle primer)

 

50 Beowulf® Brass (Magnum Large Pistol primer)

OUT OF STOCK

 

NOT AVAILABLE

       

50-110 Win Brass

50-100 Winchester, 50-105 Win, 50-110 Win

Originally designed for use with black powder, when loaded with smokeless powder in adequate gun systems, it can achieve power comparable to that of many British safari calibers. Designed for use with a .510"-.512" Dia. projectile. 50-110 Winchester

 

 

50-70 Gov't Brass

50-70 Government, 50-70 Musket, 50-70

Originally designed for black powder, this obsolete vintage cartridge is again rising in popularity due to the advent of cowboy action shooting and Black powder Silhouette competition. 50-70 Government Brass / 50-70 Govt Brass

 

50-110 Win Brass (Large Rifle primer)

 

50-70 Gov't Brass (Large Rifle primer)

NOT AVAILABLE

 

PACK 50

$148.00

       

50-90 Sharps Brass

50-100 Sharps, 50-110 Sharps

Originally designed for black powder, this obsolete vintage cartridge is again rising in popularity due to the advent of cowboy action shooting and Black powder Silhouette competition.

 

 

 

 

500 Auto Max Brass


The .500 Auto Max was designed by Big Horn Armory for use in their AR500 rifle, which is based on the AR-10 sized platform. The .500 Auto Max is essentially a rimless .500 S&W Magnum.  It is a very versatile cartridge; it can handle anything from prairie dogs to pachyderms to Peterbilts, truck stopping power in a platform weighing less than 10 pounds.  The .500 Auto Max uses the same reloading dies, shell holders & load data as the .500 S&W Mag, with the exception of requiring a taper crimp instead of the standard roll crimp. This is due to the Auto Max head spacing off of the mouth of the case instead of the rim.

 

50-90 Sharps Brass (Large Rifle primer)

 


500 Auto Max (Large Rifle primer)

PACK 50

$165.00

 

NOT AVAILABLE
 

       

 

500 Linebaugh Brass

The .475 and .500 Linebaugh are among the most powerful hunting revolver calibers available today. Several custom gun makers chamber special revolvers for this proprietary cartridge. The .500 Linebaugh uses a .510" diameter projectile.   
















 

 

 



500 S&W Mag Brass

500 Smith & Wesson Brass, 500 S&W Brass, 500 Mag Brass

The Initial run of 500 S&W Mag (R) cases was built to use large pistol primer per Smith & Wesson and Cor-bon specifications. On July 28, 2003, Smith & Wesson and Cor-bon changed specification of primer pocket to be large rifle. Rifle primers are same diameter as pistol except they are approximately .006" taller. This was done to prevent primer from being pierced by firing pin when loaded with max loads and heavy bullets (bullets over 400 grains). It was determined that hole in primer allowed pressure to damage firing pin and bushing, kind of like a cutting torch and the harder cup of a rifle primer will prevent occurrence. All cases sold by Starline, Inc. after July 28, 2003, will contain a large rifle primer pocket to accept a large rifle primer.

Cor-bon has also tested and recommends CCI 250 primers (Magnum Large Rifle). Our new cases will have an "R" after the "Mag" on head stamp to signify rifle pocket. If you have previously purchased 500 cases without "R" on head stamp and wish to modify, you can use a large rifle pocket uniformer to deepen primer pocket to accept large rifle primers by deepening pocket approximately .006". This will not affect integrity of case. For concerns regarding situation contact Smith & Wesson or Cor-bon as they designed case and subsequently changed it.

 

500 Linebaugh Brass (Large Rifle primer)

 


500 S&W Mag Brass (Large Rifle primer)

NOT AVAILABLE
 

 

NOT AVAILABLE
 

       



500 Special Brass

500 S&W Special

The .500 Special was introduced in 2004 by Corbon for use with reduced loads in the .500 S&W Magnum revolvers. With a case length equal to a 44 magnum (.350 shorter than standard .500 S&W Mag) it allows users to shoot with dramatically less recoil while still retaining performance greater than the 44 Magnum.





 

 

56-50 Spencer (Taylor's) Brass

The 56-50 Spencer (Taylor's) was built to C.I.P. specifications for operation in the Taylor Arms 56-50 Spencer. Rim diameter is .629" to .632", which may be too small to eject properly in some originals. Rim thickness is .057" to .061". Thickness of wall at mouth is .0125" average. Case mouth may need to be annealed if not sealing properly with low pressure loads. Maximum bullet seating depth is .375". 

 

 
500 Special (Large Rifle primer)

 

 56-50 Spencer (Taylor's) Brass (Large Rifle primer)

NOT AVAILABLE
 

 

PACKT 50

$140.00
       

6.5 Creedmoor Brass

6.5mm CM, 6.5mm Creedmoor

The 6.5 Creedmoor was designed as a target caliber in 2007 by Hornady but has become an extremely popular hunting caliber as well. While it isn't as long as some of the other 6.5 caliber short action calibers, such as the .260 Remington, the Creedmoor utilizes a 30° shoulder and very little body taper to help it achieve similar ballistics. The shorter length also gives it more versatility as far as bullet seating depth is concerned. Almost every major rifle company offers either a bolt-action rifle or a modern sporting rifle in the 6.5 Creedmoor due to its versatility and inherent accuracy.

Our 6.5 Creedmoor brass uses a Large Rifle Primer. This is the standard for this round and it is what many prefer due to its reliable ignition no matter what temperature you are shooting in or the burn rate of your powder. 
For the Small Rifle Primer version, please see our SR 6.5 CM case. 

 

 

 

6.5 Grendel Brass


6.5x39mm

The 6.5 Grendel was designed for use in an AR-15 type rifle to offer ballistics similar to the .308 Winchester, with less recoil. This flat shooting round utilizes the inherently accurate, high ballistic coefficient 6.5mm diameter bullet. Its short case length allows it to use some of the longer, heavier match bullets, making this caliber one of the best choices for long range shooting out of an AR. With proper bullet selection, this caliber is no slouch in the field either, being suitable for deer-size game as well as varmint hunting. 

Conversion of an AR to 6.5 Grendel requires a new bolt, barrel and magazines to feed the larger diameter cartridge. Several companies offer completed AR uppers and firearms, and reloading dies are readily available. Several manufacturers are now producing bolt action rifles in this caliber, many of which are built on “mini” actions, making for a lightweight rifle with plenty of range.

Our 6.5 Grendel brass uses the standard .080" flash hole as opposed to a few companies that use the .060" flash hole

 

6.5 Creedmoor (Large Rifle primer)

 

6.5 Grendel (Small Rifle primer)

PACK 50

$62.00

 

PACK 50

$72.00
       

 

This brass is the same as our standard 6.8 SPC brass except that it has not been formed and has no caliber designation on the head stamp. It should work perfectly for most 6.8 SPC based wildcats. This brass has not been annealed, and will require a body anneal prior to forming, and possibly a neck anneal after forming, depending on how far it is necked down. Wall thickness at the mouth of this brass is approximately .009", which is the same as our 6.8 brass prior to forming (the walls will get thicker when formed down, and the case will also get longer). Length is approximately 1.720".

*Since this is a basic case, and Starline has no control over how it is formed, we accept no liability and offer no warranty in its use or your inability to properly form cases. We also recommend keeping pressures within SAAMI limits of the parent case. Since this case has not been formed there may be more out-of-round mouths than normal.

Calibers that this could possibly be formed into: American .30 BHW, .30 HRT, 6.5x6.8, 6.8 GPC, etc.  

 

 

6.8mm Remington SPC, 6.8 Remington

The 6.8 SPC was designed for the military as a cartridge that landed between the 5.56mm NATO and the 7.62mm NATO to be used in the AR-15/M-4 platform. It loses very little magazine capacity versus the 5.56mm (25 vs. 30 rounds), but has better knockdown power without much more recoil.

This caliber works very well in short barreled rifles and is an easy conversion for an AR-15, requiring only a barrel, bolt, and magazine swap.
For someone looking for an AR-15 for hunting, this caliber is a logical choice, especially for recoil-sensitive shooters.

Our brass is safe to use in both 6.8 SPC and 6.8 SPC II chambers.

 

6.8 Basic (Small Rifle primer)

 

6.8 SPC (Small Rifle primer)

NOT AVAILABLE

 

NOT AVAILABLE
 

       

 

6 Creedmoor, 6 CM

The 6mm Creedmoor is the little brother to the very popular 6.5 Creedmoor. It has similar ballistics to the .243 Winchester, but its shorter length allows long, heavy bullets to be seated in the magazine. This caliber is an excellent choice for hunting, but its popularity was gained as a competition cartridge. Some of the new competitions, such as the Precision Rifle Series, require a lot of shooting and this cartridge is easy on the shoulder, even compared to the 6.5 Creedmoor. There are several companies now making bolt action and AR-10 type rifles for this caliber.

For the Small Rifle Primer of this caliber, please see our 
SR 6mm CM.  

 

 

 

7.62x25 Tokarev Brass

7.62mm Tokarev, 7.62x25mm Russian Tokarev

This case is very similar, except for the difference in length, to the .30 Mauser. Due to higher operating pressures, if the .30 Mauser cases are fired with hotter 7.62x25 loads in the CZ-52, it will tear the neck off some cases. 30 Mauser O.A.L. is .980" to .985" while 7.62x25 O.A.L. is .958" to .962". We recommend using bullets of .308" diameter in our brass.  

 


6mm Creedmoor (Large Rifle primer)
 
7.62x25 Tokarev Brass (Small Pistol primer)

NOT AVAILABLE

 

PACK 100

$42.00

       

The 7.62x39mm was developed in Russia as a mid-size military cartridge and is among the most widespread military cartridges used today. The AK47 and its variants, along with the SKS, have made this cartridge very popular in the civilian market due to the sheer number of affordable surplus firearms available. This caliber can also be had in AR-15 type rifles (requiring only a different bolt, barrel and magazine), as well as the Ruger Mini-30. Bolt action rifles are now available from companies such as CZ, Ruger, and Howa.

This close-medium range caliber is suitable for varmints and deer-size game when loaded with suitable expanding-type bullets.

Our brass is sized for use with the standard .311" diameter bullets, it will need to be neck sized if used with .308" diameter bullets.  

 

 

 

**7mm/.308, 7mm-08 Rem

While the 7mm-08 Remington was first commercially manufactured in the early 80's, its roots can be traced back to the late 50's as a popular wildcat cartridge.

This flat shooting, mild recoiling caliber has a devout following of both hunters and competition shooters. The wide selection of 7mm (.284") caliber bullets makes it a very flexible cartridge. It is widely available in both semi-auto and bolt action rifles as well as several single-shots and a few pistols. 

**As with all commercialized wildcat cartridges, minor variations in Pre-SAAMI chambers may not headspace properly, or may have clearance issues with SAAMI spec brass.

 

7.62x39mm Russian (Large Rifle primer)

 


7mm-08 Remington (Large Rifle primer)

PACK

  tTBA
 

PACK 50

  $57.00

       

 

9MM Largo Brass

9x23 Lurgo, 9x23, 9mm Bayard, 9mm Mars, 9mm Astra, 9mm Borgman, Bayard

The 9mm Largo is a 9x23 case designed for Largo gun systems such as the Star, Astra, Destroyer Carbine, and also works in most Steyrs.  

 

 

9MM Luger Brass

9mm brass, 9 Luger brass, 9mm Luger brass, 9mm Para brass, 9x19 brass, 9x19 Luger brass, 9mm Parabellum brass, 9mm Glisenti brass, 9mm pistol brass

9mm brass:  also known as 9mm Parabellum, 9mm Luger and 9x19mm.  This cartridge is now one of the most popular pistol cartridges in the world. **NOT RECOMMENDED FOR USE IN S&W SHIELD PISTOLS WITH NEAR-MAX OR +P LOADS, DUE TO POORLY SUPPORTED CHAMBER CONDITION**  

 

9MM Largo Brass (Small Pistol primer)
 


9MM Luger Brass (Small Pistol primer)

PACK 100

$42.00

 

PACK 100

$42.00

       





9MM Makarov Brass

9 MAK, 9x18, 9x18 MAK, 9mm Russian Makarov

9MM Makarov, or 9X18mm, uses a .363" diameter bullet. Used in the small Makarov surplus pistols that are readily available now in the United States.

 

 

9MM Steyr Brass

The 9mm Steyr is an Austrian cartridge designed for use in the Steyr M1912 pistol and was chambered in some Steyr MP34 submachine guns. As with all Starline products, our 9mm Steyr brass is made to tighter tolerance than the CIP standard for this cartridge.

 

9MM Makarov Brass (Small Pistol primer)

 


9MM Steyr (Small Pistol primer)

NOT AVAILABLE

 

NOT AVAILABLE

       

 

 

9mm Winchester Magnum

Basically a lengthened 9mm Luger, the 9mm Winchester Magnum was developed for use in the Wildey semi-automatic handgun. This cartridge develops near .357 Magnum performance but is generally used for making 9mm Luger blanks.

 

 

9mm + Power, 9mm + Pressure

9MM+P has no difference from the standard 9mm Luger other than head stamp designation for load segregation. Due to standard case design, it will handle +P pressures with no problems. **NOT RECOMMENDED FOR USE IN S&W SHIELD PISTOLS WITH NEAR-MAX OR +P LOADS, DUE TO POORLY SUPPORTED CHAMBER CONDITIONS**

 

9MM Win Mag Brass (Magnum Small
Pistol primer)

 

 9MM+P Brass (Small Pistol primer)

PACK 100

$48.00

 

NOT AVAILABLE

       

Designed for use in countries that banned the use of handguns in military chambering, the 9x21mm required only minor chamber reaming of firearms built for 9x19mm.

 

 

9 Super Comp, 9x23 Win, 9mm Super Comp

The 9mm Super Comp (9x23) is of a new design with a new head stamp as of 7-7-03. We have changed the head stamp to read 9x23 Comp to allow easier identification because it looked too similar to the .38 Super Comp head stamp. At the same time, we slightly changed the interior design to allow the seating of heavier bullets (i.e. 147 grains) but change will in no way affect performance of case for use with lighter bullets.  

 

 9X21 Brass (Small Pistol primer)

 

9x23 Comp Brass (Small Rifle or Small Pistol primer)

NOT AVAILABLE

 

PACK 100

$50.00

       

 

Un-tapered (W/No caliber designation)

This brass is the same as our standard 6.5 Grendel brass except that it has not been formed and has no caliber designation on the head stamp. It should work for most 6.5 Grendel and 7.62x39mm based wildcats. This brass has not been annealed, and will require a body anneal prior to forming, and possibly a neck anneal after forming, depending on how far it is necked down. Wall thickness at the mouth of this brass is approximately .009", which is the same as our 6.5 Grendel brass prior to forming (the walls will get thicker when formed down, and the case will also get longer). Length is approximately 1.550"

*Since this is a basic case, and Starline has no control over how it is formed, we accept no liability and offer no warranty in its use or your inability to properly form cases. Since this case has not been formed there may be more out-of-round mouths than normal.

Our Grendel Basic case can be formed into 6.5 Grendel and 7.62x39 based wildcats such as the .22-6.5 Grendel, 6mm Grendel, 243 LBC and 9x39mm.

 

 

Small Primer 6.5 Creedmoor

This is our Small Rifle Primer version of the 6.5 Creedmoor. The 6.5 Creedmoor was designed as a target caliber in 2007 by Hornady but has become an extremely popular hunting caliber as well. While it isn't as long as some of the other 6.5 caliber short action calibers, such as the .260 Remington, the Creedmoor utilizes a 30° shoulder and very little body taper to help it achieve similar ballistics. The shorter length also gives it more versatility as far as bullet seating depth is concerned. Almost every major rifle manufacturer offers either a bolt-action rifle or a modern sporting rifle in 6.5 Creedmoor caliber due to its versatility and inherent accuracy.

Our SR6.5CM brass uses a Small Rifle Primer. Many target shooters prefer the Small Primer for the increased consistency and accuracy. While other small pocket manufacturers use a smaller than standard flash hole, Starline uses our standard .080" flash hole, as we feel that it gives better ignition with some of the slower powders and in cooler conditions* (and you won't be breaking off de-capping pins either!) The Small Primer version also maintains primer pocket size much better than the large primer version under higher pressures. For our Large Primer version please see our 
6.5 Creedmoor case.

*As with all types of cases this large with small primer pockets, it will require care in powder and primer selection in cooler temperatures to prevent hang fires. Single-based propellants are generally easier to ignite and a quality primer such as the Remington 7 1/2 BR are recommended.

 

Grendel Basic (Small Rifle primer)
 

 SR 6.5CM (Small Rifle primer)

NOT AVAILABLE

 

NOT AVAILABLE

       

 

 

6mm Creedmoor Small pocket

The SR 6mm CM is our small rifle primer version of the 6mm Creedmoor. Just like our SR 6.5 CM, we utilize the standard .080" flash hole diameter, as we feel this gives better ignition with slower burning and hard to ignite powders.* 

The 6mm Creedmoor is the little brother to the very popular 6.5 Creedmoor. It has similar ballistics to the .243 Winchester, but its shorter length allows long, heavy bullets to be seated in the magazine. This caliber is an excellent choice for hunting, but its popularity was gained as a competition cartridge. Some of the new competitions, such as the Precision Rifle Series, require a lot of shooting and this cartridge is easy on the shoulder, even compared to the 6.5 Creedmoor. There are several companies now making bolt action and AR-10 type rifles for this caliber. 

For the Large Primer Pocket version, please see our 
6mm Creedmoor .

*As with all types of cases this large with small primer pockets, it will require care in powder and primer selection in cooler temperatures to prevent hang fires. Single-based propellants are generally easier to ignite and a quality primer such as the Remington 7 1/2 BR are recommended.

 

 


38-55 Win, 38-55 Winchester, 38-55 Ballard

The .38-55 is the standard length of 2.080" which is the same as Winchester case. Case mouth has thinner walls (.0072" average thickness at mouth) than the Winchester case allowing for use of the wide variety of bullet diameters, especially in tight chamber/large bore situations. Head stamp reads *-* .38-55.

 

 

SR 6mm CM (Small Rifle primer)

 

38-55 Brass (2.080") (Large Rifle primer)

NOT AVAILABLE

 

PACK 50

$55.00

       


45-70 Government Brass, 45-70 Marlin Brass, 45-70 Govt Brass

Our .45-70 brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application.

 

 

45-90 Brass (.45-2.4)

45-82 Win, 45-85 Win,45-90 Win, 45-90 Winchester

This is a .45-70 based case that is 2.4 inches long and is suitable for smokeless or black powder loads. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application. See annealing procedure in Commonly Asked Questions, section #4.

 

45-70 Gov't Brass (arge Rifle primer)

 
45-90 Brass (.45-2.4) (Large Rifle primer)

PACK 50

$52.00

 

PACK 50

$115.00

       



50-100 Winchester, 50-105 Win, 50-110 Win

Originally designed for use with black powder, when loaded with smokeless powder in adequate gun systems, it can achieve power comparable to that of many British safari calibers. Designed for use with a .510"-.512" Dia. projectile. 50-110 Winchester

 

 
50-90 Sharps Brass
 

50-100 Sharps, 50-110 Sharps

Originally designed for black powder, this obsolete vintage cartridge is again rising in popularity due to the advent of cowboy action shooting and Black powder Silhouette competition.
 

50-100 Win Brass (Large Rifle Primer)

  50-90 Sharps Brass (Large Rifle primer)

NOT AVAILABLE 
 

 

PACK 50

$165.00